After a few days of inverted spring cold, the temperature is beginning to rise again, the spring breeze, spring color is pleasant, you are not also planning to take advantage of the spring light with family and friends, to have a driving tour? However, long-distance driving is not the same as usual, the bow tie station Lin Shi brother suggests that car owners and friends, before traveling to do some necessary checks, the change of the change, the maintenance of the maintenance.

    Following the previous to share with you the working principle of the brake fluid these basic knowledge, this article continues to share with you what precautions in the replacement of brake fluid and brake fluid replacement process, so that you change the understanding of the replacement of peace of mind.

    Consideration of a brake fluid is mainly to consider its sensitivity in the emergency braking, we must know that in the critical moment 0.1 seconds are a matter of life and death! To a highway speed 120km/h car, for example, 1 second can run out 33.7 meters, 0.1 seconds is 3.33 meters, and high-quality brake fluid in this critical 0.1 seconds can avoid an accident!

 Or to China's most personalized car line Shanghai bow tie station recommended by the Jiafuli Yueliang DOT6.0 top brake fluid as an example, this brake fluid imported from the United Kingdom, the boiling point than the national standard and the factory standard is higher than up to 260 ° C or more, wet boiling point of up to 165 ° C or more, the movement of the viscosity (mobility) ≤ 750m m / S, mobility indicators are higher than the other brands of products doubled. This also means that compared to ordinary brake fluid, it has higher brake sensitivity and better braking performance!

    This is a low-temperature fluidity test we did, the test shows that after 24 hours of minus 40 degrees of low temperature environment, T6 brake fluid fluid is significantly higher than T4, more resistant to low temperature.

    Bowtie station Lin brother here to remind everyone in the change of brake fluid, need to pay attention to the following.

         1, different types and brands of brake fluid do not mix, different brake fluid, formulation ratio is different, mixing will cause a decline in brake fluid performance, serious cases will even lead to brake fluid failure!

         2, do not be greedy for cheap to buy fake! The use of unqualified brake fluid, brake fluid pumps will form corrosion of the skin bowl, low boiling point may also lead to brake failure!

         3, brake fluid can not add a new on the end of the matter, the replacement of brake fluid must be the entire brake line air clean, and then add a new one!

    When it comes to changing brake fluid, do you know how auto repair stores change it now?

    The difference between the traditional need for two to three people to operate the “old” way of oil change, in Shanghai tie station using a more scientific oil change operation process, through the oil change machine internal adjustable pressure pump, the new oil “hit” into the automobile brake system, in the addition of the new oil At the same time can also play a role in the brake system “flushing” role, can be completely discharged out of the old fluid brake system, to ensure that after the replacement of the brake system will not be left behind in the old fluid, affecting the performance of the brakes!

    Lastly, Mr. Lin reminds car owners that the brake system is a matter of life and limb! The boiling point of brake fluid with excessive water content will be lowered by 60°-90°.

This may not feel in normal times, once there is a sharp braking situation, the brake fluid temperature will quickly rise above the boiling point to produce a large number of air bubbles, it is easy to lead to soft brakes or even malfunction!